ISO 23936-3:2026

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠١ يوليو ٢٠٢٦

Oil and gas industries including lower carbon energy — Non-metallic materials in contact with media related to oil and gas production — Part 3: Thermosets

ملفات الوثيقة ISO 23936-3:2026

الإنجليزية 37 صفحات
الإصدار الحالي
BHD 80.61

مجال الوثيقة ISO 23936-3:2026

This document provides general principles, requirements and recommendations for the assessment of the stability of thermoset materials that include short fibre filled or particle filled resins and exclude continuous fibre reinforced composites for service in equipment used in oil and gas exploration and production environments. These procedures can be adapted for application within low-carbon energy environments. This document also provides guidance for quality assurance.

This document addresses the resistance of thermosets to the deterioration in properties that can be caused by physical or chemical interaction with produced and injected oil and gas-field media, and with chemical treatment. Interaction with sunlight and ionizing radiation are excluded from the scope of this document.

This document is not necessarily applicable to equipment used in refining or downstream processes and equipment.

The equipment considered includes, but is not limited to, non-metallic pipelines, piping, liners, seals, gaskets and washers. Applications for short-term exposure include pump-down plugs, bridge plug components, line wiper plugs, balls, setting tools and fracking tools. Applications for long-term exposure include bearings and washers. This document excludes tubular products, tanks and similar items produced from continuous fibre reinforced materials.

Blistering by rapid gas decompression is not included in the scope of this document.

This document applies to the assessment of the stability of thermoset materials in simulated hydrocarbon production conditions to aid the selection of materials for equipment designed and constructed using conventional design criteria. Designs utilizing other criteria are excluded from the scope of this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
GSO 2055-1:2015
 
لائحة فنية خليجية
منتجات الحلال – الجزء 1: الاشتراطات العامة للأغذية الحلال
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 21611:2026
 
مواصفة قياسية دولية
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
 
مواصفة قياسية دولية
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
مواصفة قياسية دولية
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C